• 600 x 800mm press pad
• Digital controller
• Pneumatic fingertip pressure control
Benefits: • Improved production through low
• Ideal for high volume production
• High quality print registration
The Omega Series 600 has a worktable which pulls out towards the operating position and away from the heat plate for loading and unloading.
After loading the work piece, and with the correct settings for temperature, pressure and dwell time, the worktable is pushed back to the operating position with the handle provided.
The cycle is started by pressing the green buttons on either the side of the head. The controller operates the timer and the solenoid valve and thus the pneumatic cylinder. When the set time elapses the heat plate is automatically lifted, enabling the worktable to be pulled out. The worktable may then be unloaded and reloaded ready for another cycle.
The Omega Series 600 is a great, versatile machine for the following applications:
• Large aluminium panels
• All over T-shirt printing
• Multi press facility (eg: 30 coasters being pressed at one time) to lower production times
• Vehicle car mats
• Photographic MDF panels
• Bar runners
Write your own review
Finance options are available for the loading.... These may vary on a case by case basis and should be discussed with a member of the Xpres team.
Xpres are not the lender, but are acting on the customers behalf to arrange contact between our finance partners.